After the curtains have been used for a long time, there will be more or less dirt, which will greatly reduce their beauty. So how to clean and maintain such curtains? Or in other words, how to clean and maintain these curtains? During the specific operation, how should you pay attention to the disassembly and installation skills of curtains? Today I will give you an example of some issues involved in removing curtains for washing, including cleaning steps and disassembly knowledge. You can refer to the actual comparison to understand.

1. How to remove and wash the curtains

Remove the curtains, clean them, and then hang them up in the sun. But how to dismantle curtains? Generally speaking, it is relatively simple to dismantle curtains. Just take them off by hooking them up. How to hang curtains is a more complicated matter. Here we focus on how to hang curtains!

It seems to be a very simple problem, but the actual installation is not that simple. Hanging curtains It seems simple, but different hook types have different hanging methods: Step 1: Determine the number of hanging rings and hooks required for each side of the curtain. Only by first determining the number of hanging rings can you make adequate preparations. So, how to allocate these loop hooks to the curtains on each side

You can use the following method: in the second step, first fold it in 2 halves, then 2 halves, and then 2 halves until you see the end.< /p>

The last folded fold is where the loops and hooks are to be hung. Just count the folded folds and make sure they are less than or equal to the number of loops and hooks you have.

The third step is to pull the curtains toward the middle after the curtains are hung. Then the last hanging ring will be stuck. This will ensure that all the curtains will not run to the middle. .

Step 4: After the hooks on both sides of the poles are installed, you need to install the middle hook to hook the pole. If the middle position is crooked, the curtain will not be fully opened on one side. It's not enough to fully open the other side.

Here are the methods on how to remove curtains and how to hang curtains. Have you learned them all? If you have washed the curtains but are not able to hang them, you should be able to after reading this article. Yes! If you really can’t, you can only ask the owner of the curtain shop for help.

2. Curtain cleaning steps

Correct cleaning of curtains can be divided into four major steps. First, dismantling the curtains requires washing. It should be noted that before disassembly, use a feather duster and a vacuum cleaner to carefully remove dust on the surface of the curtains. Use professional tools to dismantle the curtains. If some parts are stuck, do not use brute force to remove the curtain cloth by taking out the surrounding cards. I believe that everyone has encountered the situation where some small parts such as clips and dings of the curtains fell off during the process of disassembling the curtains. I would like to remind everyone that when disassembling the curtains, special containers should be used to hold the small parts removed from the curtains.

The examples given above are about the methods of disassembly and cleaning of curtains and installation techniques. From this, we can know that although the structure of curtains seems to be very simple, if the post-processing is not appropriate, it will also cause Their spare parts are dropped or damaged, which in turn affects the actual use effect of the curtains. Therefore, it is best for consumers to understand the above-mentioned information in advance, compare the actual situation, and formulate appropriate plans, so that the curtains can be repaired. Cleaning and maintenance. And it can avoid damaging the performance characteristics of the curtain itself as much as possible.